Telescopic Hydraulic Cylinders – Application and Possibilities

When a normal working stroke of a hydraulic cylinder is not feasible for the task required, telescopic Hydraulic Cylinder is employed. A telescopic hydraulic cylinder is nested in stages where the effect of the piston is expanded over multiple barrels fitted perfectly in a small main sleeve.

As most telescopic hydraulic cylinders are fitted together within a sleeve, which is almost 20% of the actual working length, they provide a better working stroke. Given its compact size, a telescopic hydraulic cylinder is used when a conventional single-rod hydraulic cylinder is not feasible.

A telescopic hydraulic cylinder works on a similar principle to single- and double-acting hydraulic cylinders. The main difference between the two types is that in telescopic cylinders the piston or barrel is nested in a compact housing along with other tubes which extend together with the extension of the piston or the main barrel.

Manufacturing of Telescopic Hydraulic Cylinder at Eurobalt®

The manufacturing of telescopic hydraulic cylinders takes place on our premises. We manufacture all the components and then assemble them after all the parts have gone through a rigorous testing and screening process.

While we provide fully assembled telescopic hydraulic cylinders, our customers have the luxury of ordering specific parts for their own assembly process. Let’s take a look at how parts of telescopic hydraulic cylinders are manufactured and then assembled.

The housing of a telescopic hydraulic cylinder is the outer casing that stores the nested barrels used during the expansion. For the manufacturing of housings, we utilize machining to get the required circular shape.

The metal type and length specified by the clients are used when producing the housing. Since it is the most essential part of a telescopic hydraulic cylinder, it is produced in our factory in the first place. When it comes to a regular piston, the piston, or the main tube, is also machined with the possibility of sintering.

The rods are made with certified metals and are machined to take the perfect shape. Holes are also made in the sleeves for the flow of oil or pressurized liquid.

For hydraulic heads and glands, production is done through the sintering process. Sintering helps to reduce the wastage of material. Then, to finish off the process, machining is used to remove kinks and some deformities. The end caps of telescopic hydraulic cylinders also undergo a similar process.

Assembly of telescopic hydraulic cylinders is also done in our factory. We can supply singular parts as well as provide ready-made cylinders for our customers. During the assembly process, quality control is done with vigour by our experienced technicians who have years of experience assembling telescopic hydraulic cylinders.

We can manufacture both single- and double-acting telescopic hydraulic cylinders. Single-acting is a simpler process, but the quality control and attention to details are not let up for a second.

A double-acting telescopic hydraulic cylinder is a complex piece of machinery that requires a lot of attention, as there are numerous moving and essential parts in it. Since our employees are experienced in the assembly of both types of cylinders, we are best suited to satisfy your needs.

Application of Telescopic Hydraulic Cylinder

For most equipment requiring hydraulic cylinders, a single rod system will do as they are less complex and extremely reliable. But there are certain situations where, depending on the application, one needs to switch to telescopic hydraulic cylinders.

With a telescopic hydraulic cylinder, there are more strokes in a compact size, and this long stroke combined with the size comes in handy when there is a small surface area to work within a vehicle or machinery.

While single-rod hydraulic cylinders can be utilized in most cases, here are some applications of telescopic hydraulic cylinders:

Dump Truck
The most common use of telescopic hydraulic cylinders can be seen in a dump truck. When unloading, a dump truck needs to reach an angle of 60 degrees, and a normal cylinder will not be able to achieve that; or it needs an extremely long rod to finish the task, which would be expensive.
Single-acting hydraulic cylinders can be used in dump trucks, as the vertical motion would allow for a smooth retraction. Double-acting hydraulic cylinders can be used when moving horizontally, while retraction force is needed to be used.
Construction Equipment
Telescopic hydraulic cylinders can be fitted into construction equipment. A crane needed to move heavy loads can extend horizontally, while a digging vehicle can reach better depths with the help of telescopic hydraulic cylinders.
Oil Rigs
Oil rigs are known to use both telescopic and single-rod hydraulic cylinders. They achieve their task by employing both types forming a hybrid. As offshore oil rigs are situated in small spaces, telescopic hydraulic cylinders are space savers and also give better output than single-rod cylinders.
Other Use
Lift systems for cleaning windows utilize telescopic hydraulic cylinders. After reaching a certain fixed height with the metal frame structure, the cylinders help to extend the top a little further.

Possibilities with Eurobalt®

At Eurobalt Engineering, we take all the wishes of our customers in stride. Our production line is equipped to handle most of the customization preferences of our clients. Whether the length of the telescopic hydraulic cylinder or the material of seals used, there are varieties of options that we make available to our partners.

In a competitive market, we need to offer competitive prices and also the best quality of the product. Keeping all that in mind, we still offer various features according to the requirements of our clients. Customizability and availability are two of our greatest traits, so the possibilities are endless with Eurobalt®.